The large full servo robot arm is applied for all kinds of horizontal injection molding machines ranging from 650t to 2400t. It is suitable for the taking out application of large plastic parts such as auto parts and household appliance shell, garbage can and plastic pallet.
● Open structure with more space on three sides.
● Larger loading capacity, stronger rigidity.
● Three axis are all driven by high-performance AC servo motors.
● The upper and lower arms of the robot are designed with a vertical telescopic double truncated arm structure, which runs at double speed, which enables the mechanical arm to achieve the full stroke in a shorter time, and shortens the vertical height of the robot, which is suitable for low-height workshop environment.
Remark: LE: 3 axis; S:double cut; J:clip; X:suction;
|Model||I.M.M Range （T）||Vertical Stroke|
|Croosswide stroke (mm)||Traverse stroke (mm)||Type||Min take time|
|Max load (kg)||Dry cycle time (sec)||Air consumption (nl/cycle)||Net weight (kg)||Drive method||Air power||Working air pressure|
|NLE 700JX||50-150||700||600||1500||single stage||2||5||4||7||180||AC servo motor||0.6-0.8||5-7||AC220V(±10%)50/60Hz|
|NLE 800JX||100-280||800||700||1500||single stage||2||5||5||8||190|
|NLE 1500SJX||650-800||1600||1200||2200||double stage||2||15||6||12||1300|
|NLE 1800SJX||650-1200||1800||1200||2600||double stage||3||20||7||12||1400|
|NLE 2000SJX||850-1200||2000||1400||2600||double stage||3.5||20||8||12||1550|
|NLE 2200SJX||1000-1600||2200||1400||3100||double stage||4||35||9||12||1700|
|NLE 2500SJX||1600-2100||2500||1600||3600||double stage||4.5||35||10.5||12||1900|
|NLE 3000SJX||1850-4000||3000||1600||4300||double stage||5||50||12||14||2200|
* Without further notice if specification and exterior have been changed because of improvement. Thanks for understanding.