5 axis robot arm are applied to various types of horizontal injection molding machine, from 100 to 650Tons. It's applicable for a variety of special actions, such as arrangement, stacking , quality inspection and embedding, etc.. According to different product requirements, the robot can cooperate with a variety of fixtures to achieve a stable and perfect action. After install this robot, you can increase productivity by 10~30%, reduce defective rate, ensure safety of operators , reduce man power and accurately control the output to reduce waste.
● All 5 axis are are driven by high performance AC servo motor.
● Double cut structure is used for the upper and lower arm, full stroke can be achieved by half stroke, which can shorten the robot vertical height, increase removal speed, applicable for low height workshop.
Remark: LF: 5 axis; S: double stage; J: clip; X: suction;
|Model||I.M.M Range （T）||Vertical Stroke|
|Croosswide stroke (mm)||Traverse stroke (mm)||Type||Min take time|
|Max load (kg)||Dry cycle time (sec)||Air consumption (nl/cycle)||Net weight (kg)||Drive method||Air power||Working air pressure|
|KLF 800SJXB||100-220||800||P:200-700 / R:140-550||1400||double stage||0.8||5||5||4||260||AC servo motor||0.6-0.8||5-7||AC220V(±10%)50/60Hz|
|KLF 1000SJXB||220-350||1000||P:300-920 / R:140-780||1600||1||5||6||6||340|
|KLF 1200SJXB||350-650||1200||P:300-1300 / R:140-1050||1800||1.2||8||7||6||450|
*Without further notice if specification and exterior have been changed because of improvement. Thanks for understanding.