Home > Products > Robot Arm for Injection Molding Machine > LG Series

2 Axis Robot Arm

Suitable for I.M.M.: 120-380T






2 axis robot arms are applied to various types of horizontal injection molding machine, from 160 to 500Tons. It’s applicable for quick removal and a variety of applications. According to different product requirements, the robot can cooperate with a variety of fixtures to achieve a stable and perfect action, with rapid picking products inside mold and slow placing products outside mold. After install this robot, you can increase productivity by 10~30%, reduce defective rate, ensure safety of operators, reduce man power and accurately control the output to reduce waste.

● The traverse axis and vertical axis are driven by high performance AC servo motor.

● Both single arm and double arms are for your choice. The finished arm takes out the product and the nozzle. The material arm is used for the water inlet.

● Double cut structure is used for the upper and lower arm, full stroke can be achieved by half stroke, which can shorten the robot vertical height, increase removal speed, applicable for low height workshop.

Remark: LC: 2 axis; S: double stage; J: clip; X: suction B: double arm;

Main Specification

2 Axis Robot Arm

2 Axis Robot Arm

*Without further notice if specification and exterior have been changed because of improvement. Thanks for understanding.