Single axis robot arm are applied to various types of horizontal injection molding machine, from 160 to 500Tons. It’s applicable for quick removal and a variety of applications. According to different product requirements, the robot can cooperate with a variety of fixtures to achieve a stable and perfect action, with rapid picking products inside mold and slow placing products outside mold. After install this robot, you can increase productivity by 10~30%, reduce defective rate, ensure safety of operators , reduce man power and accurately control the output to reduce waste.
● The traverse movement is driven by high performance AC servo motor.
● The finished arm takes out the product and the nozzle. The material arm is used for the water inlet.
● Double cut structure is used for the upper and lower arm, full stroke can be achieved by half stroke, which can shorten the robot vertical height, increase removal speed, applicable for low height workshop.
Remark: LD: single axis; S: double stage; J: clip; X: suction B: double arm;
|Model||I.M.M Range （T）||Vertical Stroke|
|Croosswide stroke (mm)||Traverse stroke (mm)||Type||Min take time|
|Max load (kg)||Dry cycle time (sec)||Air consumption (nl/cycle)||Net weight (kg)||Drive method||Air power||Working air pressure|
|KLD 650SJXB||50-180||650||P:250 R:150||1100||double stage||2||3||8||16||220||Z: servo motor|
X Y: Pneumatic
|KLD 750SJXB||50-230||750||P:250 R:150||1300||2||3||8||18||240|
|KLD 850SJXB||150-280||850||P:250 R:150||1500||2||3||8||20||260|
|KLD 1000SJXB||200-380||1000||P:250 R:150||1700||2||3||9||22||280|
|KLD 1200SJXB||320-470||1200||P:350 R:150||1890||2.3||6||15||23||360|
|KLD 1400SJXB||470-650||1400||P:350 R:150||2180||2.5||6||16||25||420|
*Without further notice if specification and exterior have been changed because of improvement. Thanks for understanding.